Verkfæri og Tól Archives

Close

Borðsög – HECHT 8254

77.990 kr.

Benefits: – Reliable assistant in every workshop and on site – Suitable for cutting all types of wood – Super

Setja í körfu

Close

Brothamar HECHT 1028 – SDS 4,5J

29.990 kr.

Weight	4.5 kg
Power	1050 Watts
No load speed	0 - 950 rpm
Electric engine	230V / 50Hz
Max. drilling diameter: iron / concrete / wood	13/26/40 mm
Stroke	0 - 4250 rpm
The strength of the stroke	4.5 J

Setja í körfu

Close

Brothamar HECHT 1035 – SDS 5J

37.990 kr.

electric motor 230V / 50Hz power 1300 W no load speed 870 rpm impact force - 5 J max drilling diameter: concrete - 32 mm weight 4.9 kg.

Setja í körfu

Close

Brothamar HECHT 1090 – SDS 15J

47.990 kr.

Weight	7.2 kg
Power	1,300 Watts
Electric engine	230V / 50Hz
Stroke	3600 rpm
The strength of the stroke	15 J

Setja í körfu

Close

Brothamar HECHT 1093 – SDS-HEX 60J

64.990 kr.

Electric hammer. 1900 min-1 impact. Power consumption 1700 W. Impact force 60 J. SDS-HEX chuck. Weight 14.9 kg. additional handle 1 × pointed chisel 1 × flat chisel 1 × grease carbon brush plastic case

Setja í körfu

Close

Brothamar HECHT 1097 – SDS 45J

54.990 kr.

Electric engine	230V / 50Hz
Power	1700 watts
Stroke	2200 rpm
Stroke strength	45 J.
Weight	11.5 kg

Setja í körfu

Close

Geirungssög – HECHT 813

39.990 kr.

HECHT 814 is a miter saw that will surely attract every DIY enthusiast. The drive is provided by a 1400W electric motor powered by 230V / 50Hz. Suitable for precise cutting of wood, e.g. shortening bars, wooden slats and the like. Accuracy and perfect control over the cutting is also ensured by the integrated laser, which will accurately mark the position and inclination of the cut on the material being cut. With a weight of 6.3 kg, it is also easy to carry. The saw is equipped with a dust bag, blade diameter 210 mm. The range of the saw blade is -45 ° / 0 ° / 45 °, bevel cutting can be made in the range of 0 ° - 45 °.

Setja í körfu

Close

Geirungssög – HECHT 820

68.990 kr.

Engine	Electric 230 V / 50 Hz
Power	2100 Watts
Dial diameter	255 mm
Tilt setting	90 ° to 45 °
Cutting setting	-45 ° / 0 ° / 45 °

Setja í körfu

Close

Geirungssög – HECHT 828

52.990 kr.

Engine	Electric 230 V / 50 Hz
Power	1800 Watts
Dial diameter	210 mm
Tilt setting	90 ° to 45 °
Cutting setting	-45 ° / 0 ° / 45 °

Setja í körfu

Close

Geirungssög – HECHT 829

52.990 kr.

Libra	12.2 kg
Power	2000 W.
The diameter of the cutting disc	210 mm
No load speed	4800 rpm

Setja í körfu

Close

Geirungssög / Prófílsög – HECHT 834

46.990 kr.

Power	2400 Watts
Dial diameter	355 mm
No load speed	3600 rpm
Electric engine	230 V / 50 Hz

Setja í körfu

Close

Hjólsög – HECHT 1612

20.990 kr.

Libra	3.8 kg
Power	1200 watts
Dial diameter	185 mm
No load speed	5800 rpm
Electric engine	230 V / 50 Hz
Cutting depth	62 mm

Setja í körfu

Close

Hjólsög – HECHT 1613

18.990 kr.

Benefits A well-equipped circular saw for every workshop Powerful 1200 W motor Max. blade diameter 185 mm Max. cutting depth 65 mm

Setja í körfu

Close

Hjólsög – HECHT 1620

26.990 kr.

Electric engine	230 V / 50 Hz
Power	1800 W
No load speed	5000 rpm
Dial diameter	210 mm
Cutting depth	73 mm
Weight	6.4 kg

Setja í körfu

Close

Hjólsög – HECHT 1624

18.990 kr.

Benefits A well-equipped circular saw for every workshop 1400 W powerful motor Max. blade diameter 185 mm Max. cutting depth 65 mm

Setja í körfu

Close

Hjólsög – HECHT 1626

23.990 kr.

Engine	Electric 230V / 50Hz
Power	1500W
Engine revolutions	4700rpm
Dial diameter	185mm
Cutting depth	63mm

Setja í körfu

Close

Hjólsög Lítil – HECHT 1067

23.990 kr.

Benefits: -Light and practical helper in every workshop -Modern and ergonomic design for one-handed use -Maximum 750W motor -Max. cutting depth

Setja í körfu

Close

Höggborvél HECHT 1017

10.990 kr.

- 650 W motor powerful enough. -Idle speed 3000 rpm - Impact frequency 0-48000 / min -Metal handle -High-quality gear and bearings ensure a long service life -Electronic speed control on the switch - Right / left gear -Drilling depth indicator -Metal handle for tightening the handle -Possibility to lock the switch for operation in difficult positions or in confined spaces -Two drilling modes: wood, plastic, metal or hammer drilling for concrete, etc. -Additional, optionally adjustable soft grip for working with both hands -Weight 1.58 kg

Setja í körfu

Close

Höggborvél HECHT 107 SETT

27.990 kr.

- 159 pcs. Pins and screws in a separate organizer - Practical case for storing all drilling accessories - Electric drill with a 750W impact - 20 drills (6 x wood, 6 x concrete, 8 x metal) - Screwdriver with a bit - Tape measure 3m - 50 pieces of bits

Setja í körfu

Close

Höggborvél HECHT 1070

7.990 kr.

voltage 230 V / 50 Hz max. drilling diameter - iron 13 mm power 650 W clamping 13 mm no load speed 0-3000 min-1 weight 1.8 kg impact 0-48000 min-1 speed regulation, impact, additional handle, drilling depth limiter, head with a key

Setja í körfu

Close

Höggborvél HECHT 1071

12.990 kr.

Powerful 750 W motor
Idle speed 3000 rpm
Impact frequency 0-54000 / min
Quick-release chuck for easy tool changes
High-quality gearbox and bearings for a long service life
Electronic speed control on the switch
Run right / left
Drilling depth stop
The switch can be locked for operation in difficult positions or in confined spaces
Two drilling modes: drilling in wood, plastic, metal or hammer drilling in concrete etc.
Additional, optionally adjustable soft grip for both hands

Setja í körfu

Close

Höggborvél HECHT 1072

14.990 kr.

The powerful 900 W motor allows you to work even in the most demanding conditions
Idle speed 3000 rpm
Impact frequency 0-48000 / min ^-1
Quick-release chuck for easy tool changes
High-quality gearbox and bearings for a long service life
Electronic speed control on the switch
Run right / left
Drilling depth stop
The switch can be locked for operation in difficult positions or in confined spaces
Two drilling modes: drilling in wood, plastic, metal or hammer drilling in concrete etc.
Additional, optionally adjustable soft grip for both hands

Setja í körfu

Close

Höggborvél HECHT 1074

19.990 kr.

- Powerful 1,200 W motor - Idle speed 2,800 rpm - Impact 0 - 48,000 beats per minute - Durable metal two-speed gearbox and bearings for long service life - Right / left running - Drilling depth stop - Lockable switch for working in difficult positions or confined spaces - Additional, optional adjustable soft handle for working with both hands - Weight 2 kg - Electric hammer drill. Power consumption 1200 W. Speed without load 0-2800 / min. Max. drilling diameter iron 13 mm, concrete 13 mm, wood 25 mm. Weight 2.85 kg.

Setja í körfu

Close

Höggborvél HECHT 1081 – SDS 3J

24.990 kr.

Weight	3.4 kg
Power	1050W
Tension	230V / 50Hz
No load speed	0-1070 / min
Max. drilling diameter: iron / concrete / wood	13/26 / 40mm
Stroke	0-4800 / min
The strength of the stroke	3J

Setja í körfu

Close

Hrærivél HECHT 1137

26.990 kr.

Weight	3.5 kg
Power	1400 watts
No load speed	0-570 / 0-760 rpm
Electric engine	230 V / 50 Hz
Thread diameter	M14
Length of the agitator	590 mm
Agitator diameter	120 mm
Stirrer included	1

Setja í körfu

Close

Hrærivél HECHT 1138

28.990 kr.

Electric engine	230 V / 50 Hz
Power	1600 watts
No load speed	0-580 / 0-780 rpm
The diameter of the stirrer	140 mm
Agitator length	590 mm
Thread diameter	M14
Weight	4 kg
Agitator included	Yes

Setja í körfu

Close

Hrærivél HECHT 1140

32.990 kr.

voltage 230 V / 50 Hz diameter of the stirrer 140 mm power 1800 W length of the stirrer 590 mm no load speed 0-440 / 0-780 rpm weight 7.25 kg Aluminum handle Soft start Two-stage gear Smooth speed control Included stirrer (handle M14)

Setja í körfu

Close

Standborvél HECHT 1063

46.990 kr.

Stable, durable construction ensures trouble-free operation with various materials such as wood, metal or plastic High-performance 600 W motor in this category ensures uncompromising drilling of various materials No-load speed 420–2700 / min The choice of 12 programmed gears allows you to easily adjust the speed for each material The gearbox is made of solid metal casting, which ensures a long life The robust handle 16 mm can handle drilling with larger drill bits Smooth drilling depth adjustment Spindle protection increases operator safety Adjustable workbench For even greater machine stability, the solid stand can be screwed to the base or countertop with screws. Column drilling machine with 600 W motor and high quality gear. No load 420 - 2700 / min. Lifting height 252 mm, grip size 16 mm. Number of speeds 12. Weight 30 kg.

Setja í körfu