Showing all 11 results

Show sidebar
Close

Innbyggður Arinn – Kratki Franek 10

309.900 kr.
Meðal hiti: 10kw Lágmarks og hámarks hiti: 5kw – 13kw Breidd: 60cm Hæð: 91,4cm Dýpt: 44,5cm MAXIMUM USE OF ENERGY Maximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high-quality cast iron with a thickness of 8 mm. Afterburning of fuel particles thanks to a deflector that extends the exhaust path. Triple combustion chamber ventilation system: primary air - supplied under the grate; secondary air is supplied through openings in the rear wall. Additionally, the insert uses a clean glass system (air curtain). Manual control over the combustion process by the ash pan shift. Air supply only from the outside thanks to the built-in 125 mm air inlet connection.

SAFETY AT THE HIGHEST LEVEL

A decorative fence makes it easy to maintain cleanliness and protects against wood falling out.

ECOLOGICAL COMBUSTION

The device meets the Ecodesign requirements and the BImSchV 2 standard , which determines the maximum CO emission.

COMFORTABLE USE

A large combustion chamber that allows you to load a large amount of fuel at a time without the need for frequent addition.

Reduction of soot deposition thanks to the clean glass system (air guide).

Movable, two-piece cast iron exhaust outlet with 360 ° adjustment, can be directed both to the rear and upwards.

Movable two-piece cast iron grate.

MODERN DESIGN

Decorative, heat-resistant glass that can withstand temperatures up to 660 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the insert.

Setja í körfu
Close

Innbyggður Arinn – Kratki Franek 12

324.900 kr.
Meðal hiti: 12kw Lágmarks og hámarks hiti: 5kw – 14,5kw Breidd: 70cm Hæð: 96,8cm Dýpt: 47,6cm MAXIMUM USE OF ENERGY Maximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high-quality cast iron with a thickness of 8 mm. Afterburning of fuel particles thanks to a deflector that extends the exhaust path. Triple combustion chamber ventilation system: primary air - supplied under the grate; secondary air is supplied through openings in the rear wall. Additionally, the insert uses a clean glass system (air curtain). Manual control over the combustion process by the ash pan shift. Air supply only from the outside thanks to the built-in 125 mm air inlet connection.

SAFETY AT THE HIGHEST LEVEL

A decorative fence makes it easy to maintain cleanliness and protects against wood falling out.

ECOLOGICAL COMBUSTION

The device meets the Ecodesign requirements and the BImSchV 2 standard , which determines the maximum CO emission.

COMFORTABLE USE

A large combustion chamber that allows you to load a large amount of fuel at a time without the need for frequent addition.

Reduction of soot deposition thanks to the clean glass system (air guide).

Movable, two-piece cast iron exhaust outlet with 360 ° adjustment, can be directed both to the rear and upwards.

Movable two-piece cast iron grate.

MODERN DESIGN

Decorative, heat-resistant glass that can withstand temperatures up to 660 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the insert.

Setja í körfu
Close

Innbyggður Arinn – Kratki Franek 14

344.900 kr.
Meðal hiti: 14kw Lágmarks og hámarks hiti: 6kw – 17kw Breidd: 80cm Hæð: 96,9cm Dýpt: 47,6cm MAXIMUM USE OF ENERGY Maximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high-quality cast iron with a thickness of 8 mm. Afterburning of fuel particles thanks to a deflector that extends the exhaust path. Triple combustion chamber ventilation system: primary air - supplied under the grate; secondary air is supplied through openings in the rear wall. Additionally, the insert uses a clean glass system (air curtain). Manual control over the combustion process by the ash pan shift. Air supply only from the outside thanks to the built-in 125 mm air inlet connection.

SAFETY AT THE HIGHEST LEVEL

A decorative fence makes it easy to maintain cleanliness and protects against wood falling out.

ECOLOGICAL COMBUSTION

The device meets the Ecodesign requirements and the BImSchV 2 standard , which determines the maximum CO emission.

COMFORTABLE USE

A large combustion chamber that allows you to load a large amount of fuel at a time without the need for frequent addition.

Reduction of soot deposition thanks to the clean glass system (air guide).

Movable, two-piece cast iron exhaust outlet with 360 ° adjustment, can be directed both to the rear and upwards.

Movable two-piece cast iron grate.

MODERN DESIGN

Decorative, heat-resistant glass that can withstand temperatures up to 660 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the insert.

Setja í körfu
Close

Innbyggður Arinn – Kratki Maja BS8 Hægri

419.900 kr.
Meðal hiti: 8kw Lágmarks og hámarks hiti: 3kw – 10kw MAXIMUM USE OF ENERGY Maximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high-quality cast iron with a thickness of 8 mm. Increased heat exchange surface between hot exhaust gases and the room due to the high flue. Afterburning of fuel particles thanks to a deflector that extends the exhaust path. Manual control over the combustion process by the ash pan shift.  

SAFETY AT THE HIGHEST LEVEL

A decorative fence makes it easy to maintain cleanliness and protects against wood falling out.

ECOLOGICAL COMBUSTION

The device meets the Ecodesign requirements and the BImSchV 2 standard , which determines the maximum CO emission.

COMFORTABLE USE

A drawer / ash container, in which the remains of burnt wood are collected, and a movable grate, which facilitates the removal of ash.

A large combustion chamber that allows you to load a large amount of fuel at a time without the need for frequent addition.

Reduction of soot deposition thanks to the clean glass system (air guide).

Elegant and comfortable handle.

The possibility of leveling the insert thanks to the adjustable feet.

Double door opening system upwards (GUILLOTINE) and to the side. The raised and lowered doors facilitate loading of the wood, and the mechanism enabling the side opening will allow for more efficient cleaning of the glass.

MODERN DESIGN

The front of the insert is made of steel intended for operation at elevated temperatures.

A fireplace insert with two panes set together at right angles (panes joined without a muntin).

5-year warranty.

Setja í körfu
Close

Innbyggður Arinn – Kratki MB 120

579.000 kr.
Meðal hiti: 20kw Lágmarks og hámarks hiti: 10kw – 27kw Body and front made of high-quality steel resistant to very high temperatures. Efficient combustion and longer temperature maintenance thanks to the lining of the combustion chamber with TERMOTEC - a heat-accumulating material that increases the temperature in the chamber. High flue and transversely placed smoke tubes - increase the heat exchange surface between the insert and the environment. Lowering the exhaust gas temperature contributes to increasing the efficiency of the device. Stable and stress-resistant fireplace door made of a closed profile. The door seal is located in a profiled channel, which guarantees its proper adhesion and prevents it from falling out during operation. Afterburning of fuel particles thanks to a deflector that extends the exhaust path.

Air supply only from the outside thanks to the built-in 125 mm air inlet connection. Adjusting the air intake with one regulator, which excludes errors in improper use.

Triple combustion chamber ventilation system: primary air - directed at the plate on which the combustion takes place; secondary air is supplied through openings in the rear wall. Additionally, the insert uses a clean glass system (air curtain).

Setja í körfu
Close

Innbyggður Arinn – Kratki MBA 17 Hægri

599.000 kr.
Meðal hiti: 11kw Lágmarks og hámarks hiti: 8kw - 17kw Body and front made of high-quality steel resistant to very high temperatures. Efficient combustion and longer temperature maintenance thanks to the lining of the combustion chamber with TERMOTEC - a heat-accumulating material that increases the temperature in the chamber. High flue and transversely placed smoke tubes - increase the heat exchange surface between the insert and the environment. Lowering the exhaust gas temperature contributes to increasing the efficiency of the device. Stable and stress-resistant fireplace door made of a closed profile. The door seal is located in a profiled channel, which guarantees its proper adhesion and prevents it from falling out during operation. Afterburning of fuel particles thanks to a deflector that extends the exhaust path.

Air supply only from the outside thanks to the built-in 125 mm air inlet connection. Adjusting the air intake with one regulator, which excludes errors in improper use.

Triple combustion chamber ventilation system: primary air - directed to the plate on which combustion takes place; secondary air is supplied through openings in the rear wall. Additionally, the insert uses a clean glass system (air curtain).

Setja í körfu
Close

Innbyggður Arinn – Kratki NBC 10

649.900 kr.

Technical data

Nominal power (kW): 10.0
Heating power range (kW): 5.0 - 13.0
Thermal efficiency (%): 83.0
Exhaust outlet diameter (mm)200
Meets the ECODESIGN criteria: Yes
Intended for recuperation: Yes
Fuel Type: recommended seasoned hardwood with a moisture content of ≤20%
CO emission (at 13% O 2) ≤ given in%: 0.06
Exhaust gas temperature (℃): 191.0
Max log length (cm): 30
The issue of pollen (dust) (mg / Nm 3 ): 27.0
Compliance with BImSchV 2 standard: Yes
Energy efficiency index EEI: 111.40
The minimum active field of outlet grilles (cm 2 ): ≥700
The minimum active field of inlet grilles (cm 2 ): ≥500
Type of glazing: lateral
Opening the door: up
Material of execution: steel
Width (cm): 87.60
Height (cm): 147.00
Depth (cm): 62.20
Air intake: Yes
The lining of the combustion chamber: Yes
Ashpan: Yes
Decorative glass type glass: Yes
Setja í körfu
Close

Innbyggður Arinn – Kratki NBC8

589.900 kr.
Meðal hiti: 8kw Lágmarks og hámarks hiti: 3,5kw – 10kw MAXIMUM USE OF ENERGY The body and the front of the insert are resistant to high temperatures thanks to the material used - high-quality steel. Efficient combustion and longer temperature maintenance thanks to the lining of the combustion chamber with TERMOTEC - a heat-accumulating material that increases the temperature in the chamber. Air supply only from the outside thanks to the built-in 125 mm air inlet connection. Adjusting the air intake with one lever, which excludes errors in improper use. Triple combustion chamber ventilation system: primary air - directed at the plate on which the combustion takes place; secondary air is supplied through openings in the rear wall. Additionally, the insert uses a clean glass system (air curtain).  

SAFETY AT THE HIGHEST LEVEL

Excellent tightness thanks to solid welds made in a noble gas shield.

Steel elements are laser cut with the use of modern devices, and then bent on CNC bending machines.

The insert is equipped with a heat-resistant glass that can withstand temperatures up to 660 ° C.

ECOLOGICAL COMBUSTION

The device meets the Ecodesign requirements and the BImSchV 2 standard , which determines the maximum CO emission.

COMFORTABLE USE

The insert is equipped with a grate, which makes cleaning the combustion chamber much easier.

The bottom plate of the insert is significantly lowered in relation to the door.

Double door opening system upwards (GUILLOTINE) and to the side. The raised and lowered doors facilitate loading the amount of wood, and the mechanism enabling the side opening will allow for more efficient cleaning of the glass.

Reduction of soot deposition thanks to the clean glass system (air guide).

MODERN DESIGN

Three-sided glazing of the insert guaranteeing the maximum vision of fire.

Convenient and silent guillotine mechanism for easy cleaning and maintenance of the insert.

Decorative, heat-resistant glass that can withstand temperatures up to 660 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the insert.

Setja í körfu
Close

Innbyggður Arinn – Kratki NBU11

894.900 kr.
Meðal hiti: 11kw Lágmarks og hámarks hiti: 4.5kw – 14kw Breidd: 57.8cm Hæð: 147.1cm Dýpt: 102cm MAXIMUM USE OF ENERGY Maximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high-quality cast iron with a thickness of 8 mm. Afterburning of fuel particles thanks to a deflector that extends the exhaust path. Triple combustion chamber ventilation system: primary air - supplied under the grate; secondary air is supplied through openings in the rear wall. Additionally, the insert uses a clean glass system (air curtain). Manual control over the combustion process by the ash pan shift. Air supply only from the outside thanks to the built-in 125 mm air inlet connection.

SAFETY AT THE HIGHEST LEVEL

A decorative fence makes it easy to maintain cleanliness and protects against wood falling out.

ECOLOGICAL COMBUSTION

The device meets the Ecodesign requirements and the BImSchV 2 standard , which determines the maximum CO emission.

COMFORTABLE USE

A large combustion chamber that allows you to load a large amount of fuel at a time without the need for frequent addition.

Reduction of soot deposition thanks to the clean glass system (air guide).

Movable, two-piece cast iron exhaust outlet with 360 ° adjustment, can be directed both to the rear and upwards.

Movable two-piece cast iron grate.

MODERN DESIGN

Decorative, heat-resistant glass that can withstand temperatures up to 660 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the insert.

Setja í körfu
Close

Innbyggður Arinn – Kratki MBA 17 Vinstri

599.000 kr.
Meðal hiti: 11kw Lágmarks og hámarks hiti: 8kw – 17kw Body and front made of high-quality steel resistant to very high temperatures. Efficient combustion and longer temperature maintenance thanks to the lining of the combustion chamber with TERMOTEC – a heat-accumulating material that increases the temperature in the chamber. High flue and transversely placed smoke tubes – increase the heat exchange surface between the insert and the environment. Lowering the exhaust gas temperature contributes to increasing the efficiency of the device. Stable and stress-resistant fireplace door made of a closed profile. The door seal is located in a profiled channel, which guarantees its proper adhesion and prevents it from falling out during operation. Afterburning of fuel particles thanks to a deflector that extends the exhaust path.

Air supply only from the outside thanks to the built-in 125 mm air inlet connection. Adjusting the air intake with one regulator, which excludes errors in improper use.

Triple combustion chamber ventilation system: primary air – directed to the plate on which combustion takes place; secondary air is supplied through openings in the rear wall. Additionally, the insert uses a clean glass system (air curtain).

Setja í körfu
Close

Kamína – Kratki K9 fi 150

244.990 kr.
Meðalhiti: 10kw Lægsti og hæsti hiti: 5,5 - 13,5kw MAXIMUM USE OF ENERGY Maximum use of heat and trouble-free operation thanks to the walls of the furnace made of high-quality cast iron with a thickness of 8 mm. Afterburning of fuel particles thanks to a deflector that extends the exhaust path. Manual control of the combustion process through the ash pan.   ECOLOGICAL COMBUSTION

The device meets the Ecodesign requirements .

SAFETY AT THE HIGHEST LEVEL

Classic front of insert is equipped with heat-resistant ceramics that can withstand temperatures up to 660 ° C.

A decorative fence makes it easy to maintain cleanliness and protects against wood falling out.

COMFORTABLE USE

The cold handle system allows it to be removed when burning in the goat.

A drawer / ash container, in which the remains of burnt wood are collected, and a movable grate that facilitates the removal of ash.

Reduction of soot deposition thanks to the clean glass system (air guide).

Can be used in various installation conditions, thanks to the adjustable exhaust outlet: at the back or at the top of the goat.

Setja í körfu